58
User can select
Video size
,
Frame rate
,
Video
and
Quality Mode
of camera. And scroll the bar to
adjust the
Quality
,
Brightness
,
Contrast
,
Hue
,
Saturation
, and
Sharpness
of the camera.
Recording Setting
-
Save Original Format:
Save the video that is compressed by IP camera’s compress mode.
-
Transcode by MPEG4 Encoder:
DVR system is decoding the video and compress video
again by using MPEG4 encoder.
Preview Setting:
preview setting will relate to the
Save Original Format
.
-
Decode key frame for Preview:
When previewing video, DVR system only shows key frame
and one frame per second.
-
Enable live display performance optimization:
The live video performance will be optimized
while display.
-
Enable update when motion:
The video will update only when compare the key frame has
motion found, and then, the video will be displayed.
Schedule Connect
User can select a certain date and time to connect with IP camera. The blue block means connect
with IP camera and the white block means disconnect with IP camera. Select the connection
status (blue or white) and click the date and time block to set the connection schedule.
I/O Control:
To setup the sensor and relay devices that is installed on IP camera.
Sensor Setting:
To setup sensor that is embedded on the camera.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name in
Name
column
3. The system automatically detects the camera and input relates information. In the
Content section, enter sensor description.
4. In the test section, click
Test
to check the sensor status. Red is high and Green is low.
Содержание IWH3216 Touch
