42
9. Now, user can assign formatted hard disk or partition as a storage path ( see also
Network Setting
Configure the network setting (IP address, subnet, DNS, gateway) of the system.
Enable DHCP:
To use DHCP server assigning DVR server an IP address.
Static IP:
Assign a fixed IP address for DVR server
-
IP ADDRESS:
Assign a constant IP address which a real IP addresses give from ISP to
DVR system.
i
Do Not assign the DVR to 1.0.0.0 network segment. It will cause the DVR cannot access to
Internet due to the un-recognize to 1.0.0.0 IP segment.
-
Mask:
It is a bitmask used to identify the sub network and how many bits provide room for host
addresses. Enter the subnet mask of the IP address which user has assigned to DVR system.
-
GATEWAY:
A network device act as a passageway to internet. Enter the network gateway IP
address
-
DNS:
Domain Name Server translates domain names (such as www.abb.com.tw) to IP
addresses. Enter the IP address of DNS if it is available.
Map Network Drive:
To add network storage, the Internet storage drive/folder must be mapped as
Содержание IWH3216 Touch
