Asus DS300 G2 Series, Руководство пользователя

Страница: 41 / 262

DS300f G2 Series User Manual
35
C
hapter
3: s
etup
This chapter covers the following topics:
• "Setting-up the Serial Connection" on page 35
• "ASUS DS300f G2 Default IP Addresses" on page 36
• "Choosing DHCP or a Static IP Address" on page 36
• "Setting-up ASUS DS300f G2 with the CLI" on page 37
• "Setting-up ASUS DS300f G2 with the CLU" on page 41
• "Logging into ASUS Storage Management" on page <?>
• "Creating Disk Arrays and Logical Drives" on page 45
• "Enabling LUN Mapping and Masking" on page 49
s
ettInG
-
up the
s
erIal
C
onneCtIon
The initial connection accesses the serial port using the serial cable connection you made using the RJ-11 to
DB9. Use your PC’s terminal emulation program, such as Microsoft HyperTerminal, to access the Command Line
Interface (CLI).
You can also use the serial connection to manage the ASUS DS300f G2 through the Command Line Utility (CLU).
To make the initial serial connection:
1. Change your terminal emulation application settings to match the following specifications:
• Bits per second: 115200
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: none
2. Start your PC’s terminal VT100 or ANSI emulation program.
3. Press
Enter
once to launch the CLI.
4. At the Login prompt, type and press
Enter
.
5. At the Password prompt, type
password
and press
Enter
.
The screen displays:
login as: administrator
administrator@ASUS DS300f G2’s password:********
-------------------------------------------------------------
ASUS Storage DS300f G2 Command Line Interface (CLI) Utility
Version: 1.00.0000.02 Build Date: Sep 3, 2012
-------------------------------------------------------------
-------------------------------------------------------------
Type help or ? to display all the available commands
Type menu to enter Menu Driven Configuration Utility
-------------------------------------------------------------
administrator@cli>
To see the full set of CLI commands, at the administrator@cli> prompt, type
help
and press
Enter
.
To see full information about a specific command, at the administrator@cli> prompt, type
help
followed by the
command, then press
Enter
.
administrator@cli> help net