Asus DS300 G2 Series, Руководство пользователя

Страница: 43 / 262

DS300f G2 Series User Manual
37
a
cceSSInG the
mac a
DDreSS In the
clu
To access the MAC address in the CLU:
1. At the CLI command prompt, type menu and press
Enter
.
The CLU screen appears.
2. Highlight
Network Management
and press
Enter
.
3. Highlight
IPv4
and press
Enter
.
The following information displays:
Active Controller Id: 1 Port Id : 1
Max Supported Speed : 1000Mbps Link Status : Up
Protocol Family : IPv4
Status : Enabled
MAC Address : 00:01:55:61:18:65
DHCP : Disabled
IP Address : 10.0.0.1
Subnet Mask : 0.0.0.0
Gateway IP Address : 0.0.0.0
DNS Server IP Address : 0.0.0.0
s
ettInG
-
up
asus ds300
f
G2
wIth the
ClI
Setting up the ASUS DS300f G2 in the CLI includes these actions:
• "Making Subsystem Date and Time Settings" on page 37
• "Virtual Management Port Settings" on page 38
• "Making Virtual Management Port Settings – Automatically" on page 38
• "Making Virtual Management Port Settings – Manually under IPv4" on page 38
• "Making Virtual Management Port Settings – Manually under IPv6" on page 38
• "Maintenance Mode Settings" on page 39
• "Making Maintenance Mode Settings – Automatically" on page 39
• "Making Maintenance Mode Settings – Manually under IPv4" on page 40
• "Making Maintenance Mode Settings – Manually under IPv6" on page 40
m
akInG
S
ubSyStem
D
ate anD
t
Ime
S
ettInGS
To set the subsystem date and time:
1. Type
date -a mod -d
and the date in yyyyy/mm/dd format then press
Enter
.
administrator@cli> date -a mod -d 2011/03/25
2. Type
date -a mod -t
and the time in hh:mm:ss format, then press
Enter
.
administrator@cli> date -a mod -t 14:50:05
You can combine date and time settings, such as:
administrator@cli> date -a mod -d 2011/03/25 -t 14:50:05