Asus DS300 G2 Series Скачать руководство пользователя

Страница: 143 / 262

DS300f G2 Series User Manual

137

anaGInG

pare

rIves

(Clu)

Spare Drive Management includes the following functions:

•

"Viewing a list of Spare Drives (CLU)" on page 137

•

"Creating a Spare Drive (CLU)" on page 137

•

"Making Spare Drive Settings (CLU)" on page 137

•

"Running Spare Check (CLU)" on page 138

•

"Deleting a Spare Drive (CLU)" on page 138

IewInG

lISt

Pare

rIveS

(clu)

To view a list of spare drives:

From the Main Menu, highlight

Spare Drive Management

and press

Enter

A list of the current spare drives appears, including the following parameters:

•

ID number

•

Operational Status

•

Physical Drive ID number

• Configured Capacity
•

Revertible

– The spare drive returns to spare status after you replace the failed

drive in the disk array. See “Transition” on page 356 for more information.

•

Type

– Global (all disk arrays) or Dedicated (to specified disk arrays)

•

Dedicated to Array

– The array to which a dedicated spare is assigned

For more information, see "Disk Arrays" on page <?>.

reatInG

Pare

rIve

(clu)

Only unconfigured physical drives can be used to make spares. Check your available drives under Physical Drive

Management. Also see "Managing Physical Drives" on page <?>.

1. From the Main Menu, highlight

Spare Drive Management

and press

Enter

2. Highlight

Create New Spare Drive

and press

Enter

A default physical drive is shown with possible alternative choices.

3. To choose different drive, highlight the drive, press the backspace key to remove the current number, then

type a new number.

4. Highlight R

evertible

and press the spacebar to toggle between

Yes

and

A revertible drive can be returned to spare status after you replace the failed drive in a disk array. See

"Transition" on page <?> for more information.

5. Highlight

Spare Type

and press the spacebar to toggle between

Dedicated

and

Global

Dedicated means this spare drive can only be used with the specified disk arrays. Global means this

spare drive can be used by any disk array.

If you chose Dedicated, a default disk array is shown with possible alternative choices.

To choose different array, highlight the array and press the backspace key to erase the current number,

then type the new number.

6. Press

Control-A

to save the spare drive.

akInG

Pare

rIve

ettInGS

(clu)

To change spare drive settings:

1. From the Main Menu, highlight

Spare Drive Management

and press

Enter

A list of the current spare drives appears, including the following parameters:

2. Highlight the spare drive you want to change and press

Enter

3. Highlight the setting you want to change:

•

Revertible

– A revertible drive can be returned to spare status after you replace the

failed drive in a disk array. See “Transition” on page 356 for more information.

•

Type

– Dedicated means this spare drive can only be used with the specified disk

arrays. Global means this spare drive can be used by any disk array.

4. Press the spacebar to toggle between the choices.

5. For dedicated spares, type the array number the spare is assigned to.

6. Press

Control-A

to save your settings.

Содержание DS300 G2 Series







































































































































































































































































Результаты поиска

Содержание DS300 G2 Series

Отзывы:

Похожие инструкции для DS300 G2 Series

Бренды по названию

Популярные бренды

Asus DS300 G2 Series, Руководство пользователя

Результаты поиска

Содержание DS300 G2 Series

Отзывы:

Похожие инструкции для DS300 G2 Series

Бренды по названию

Популярные бренды