Asus DS300 G2 Series, Руководство пользователя

Страница: 161 / 262

DS300f G2 Series User Manual
155
w
orkInG wIth the
e
vent
v
Iewer
(Clu)
Working with the Event Viewer includes the following functions:
• "Viewing Runtime Events (CLU)" on page 155
• "Clearing Runtime Events (CLU)" on page 155
• "Viewing NVRAM Events (CLU)" on page 155
• "Clearing NVRAM Events (CLU)" on page 155
The Event Viewer displays log of subsystem events. Events are classified as:
•
Runtime Events
– A list of and information about the 1023 most recent runtime events recorded since the
subsystem was started
• NVRAM Events – A list of and information about the most important events over multiple subsystem
startups. NVRAM events are stored in non-volatile memory
Event Severity Levels
Level Description
Fatal Non-recoverable error or failure has occurred.
Critical Action is needed now and the implications of the condition are serious.
Major
Action is needed now.
Minor Action is needed but the condition is not a serious at this time.
Warning User can decide whether or not action is required.
Information Information only, no action is required.
v
IewInG
r
untIme
e
ventS
(clu)
To display Runtime Events:
1. From the Main Menu, highlight
Event Viewer
and press
Enter
.
The log of Runtime Events appears. Events are added to the top of the list. Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – See the table above.
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
2. Press the up and down arrow keys to scroll through the log.
c
learInG
r
untIme
e
ventS
(clu)
To clear the Runtime Event log:
1. From the Main Menu, highlight
Event Viewer
and press
Enter
.
2. Highlight
Clear Runtime Event Log
and press
Enter
.
3. Press Y to confirm.
v
IewInG
nvram e
ventS
(clu)
This screen displays a list of and information about the most important events over multiple subsystem startups.
To display NVRAM events:
1. From the Main Menu, highlight
Event Viewer
and press
Enter
.
2. Highlight
NVRAM Events
and press
Enter
.
The log of NVRAM Events appears. Events are added to the top of the list. Each item includes:
• Sequence number – Begins with 0 at system startup.
• Device – Disk Array, Logical Drive, Physical Drive by its ID number.
• Severity – See the table on the previous page.
• Timestamp – Date and time the event happened.
• Description – A description of the event in plain language.
3. Press the up and down arrow keys to scroll through the log.
c
learInG
nvram e
ventS
(clu)
To clear the Runtime Event log:
1. From the Main Menu, highlight
Event Viewer
and press
Enter
.
2. Highlight
NVRAM Events
and press
Enter
.
3. Highlight
Clear NVRAM Event Log
and press
Enter
.
4. Press Y to confirm.