Asus DS300 G2 Series Скачать руководство пользователя

Страница: 180 / 262

DS300f G2 Series User Manual

174

utoMAtic

estArt

If you chose the Disruptive Flash Method, the RAID subsystem and JBOD expansion units automatically restart.

That action temporarily disrupts I/O operations and drops your CLU connection.

After the screen goes blank, wait about two minutes, then re-establish your Telnet connection to the CLU. If

you cannot re-establish a connection, wait 30 seconds and try again.

PDatInG

wIth

uSb S

uPPort

USB support uses the disruptive flash method only. Both RAID controllers and all JBOD I/O modules are updated

at the same time and momentarily go offline when the RAID subsystem and JBOD unit reboot.

This procedure requires a USB flash device:

•

Formatted to FAT 32

•

At least 50 MB of free space

Download the latest OPAS_xxxxx.zip

firmware image file from ASUS Storage support:

http://www.ASUS Storage.

com/support

/ and save it the root folder of the USB flash device.

Important

Verify that no background activities are running on the RAID subsystem.

To update the subsystem firmware using ASUS DS300f G2’s USB Support feature:

Insert the USB flash device into the bottom USB port on the front panel which is for the RAID controller.

Figure 6 - 1: ASUS DS300f G2 controller LEDs

The controller status LED blinks green in half-second intervals.

2. Wait until the controller activity LED stops blinking green and starts blinking amber.

Warning

Do NOT power off the RAID subsystem during the update!

Do NOT remove your USB flash device until the LED changes color!

Within 30 seconds, remove the USB flash device, then insert the USB flash device back into the same RAID

controller.

The remove and insert action confirms that you want to update the firmware.

You can insert the USB flash device back into either USB port but it must be the same RAID controller as

step 1.

4. Wait until the controller activity LED displays steady green.

Remove the USB flash device.

utoMAtic

estArt

After you remove the USB flash device from the RAID controller, the RAID subsystem and any JBOD expansion

units automatically restart. That action temporarily disrupts I/O operations and drops your ASUS Storage

Management or CLU connection.

To reestablish your ASUS Storage Management connection:

1. Wait no less than two minutes.

2. Click

Logout

in the ASUS Storage Management Header, then log in again.

If you cannot log in, wait 30 seconds and try again.

To reestablish your CLU connection:

After the screen goes blank, wait about two minutes, then re-establish your Telnet connection to the CLU. If

you cannot re-establish a connection, wait 30 seconds and try again.

If you have a serial connection to the RAID subsystem, the connection remains during the shut-down and

USB port for the RAID controller

Содержание DS300 G2 Series







































































































































































































































































Результаты поиска

Содержание DS300 G2 Series

Отзывы:

Похожие инструкции для DS300 G2 Series

Бренды по названию

Популярные бренды

Asus DS300 G2 Series, Руководство пользователя

Результаты поиска

Содержание DS300 G2 Series

Отзывы:

Похожие инструкции для DS300 G2 Series

Бренды по названию

Популярные бренды