Alpha 6000S series, Руководство пользователя

Страница: 219 / 221

Appendix 6 LCD Keyboard Use Instruction
218
Function Code Parameter Setting
停机
参数
显示
状态
进入编辑状态
，显示一级菜
单
功能组确认，
进入二级菜单
旋转1次选择
功能码
P2.01
功能码确认，
进入三级菜单
向左旋转三次
修改闪烁位参
数
6
→
3
存储修改后
的数值，退
回二级菜单
按键
操作
将闪烁位右
移 2位，跳
至最高位
退回一
级菜单
向右旋转1次
修改闪烁位
参数
0 → 1
退出编辑
状态
旋转2次选择
功能组
P2
PRG
ESC
ENTER ＞＞
PRG
ESC PR G
ES C
ENTER
+
+
+
-
LCD
显示
功能码：P2.00
点动运行频率 补偿前频率
0.00 Hz 功能组：P0
基本功能 功能组：P2
辅助运行 功能码：P2.01
点动加速时间
功能组：P2
辅助运行 功能码：P2.02
点动减速时间
点动加速时间
6.0 s
点动加速时间
3.0 s
ENTER
ENTER
点动加速时间
1003.0 s
注：参数高位为0时，被修正不显示；参数编辑状态闪烁位移至该位时，
¨„与空白字符交替显示，改变值为非零后，后续被修正位补零正常显示。
点动加速时间
¨„ 3.0 s
Figure A6-7 LCD Keypad: Example of Parameter Edition Operation
A6.3 LCD Contrast Adjustment
When the user found the display contrast is poor, he or she can make adjustment via the combination key of the
keypad (shift key + digital encoder): turn the digital encoder
-
+
when pressing the shift key
＞＞
; if the
number increases, the contrast will be promoted; if the number decreases, the contrast will be reduced. There are
totally 5 shifts for the contrast adjustment. When the strongest contrast is reached through turning the encoder, the
contrast will not change any more and will keep the largest value, and vice versa.
Note: when the high bit of parameter is 0, the revised will not be displayed; when the parameter edition state flickering bit
shifts to the bit, it will be displayed alternately with the blank characters; after the revised value is not 0, the bit revised
successively will be displayed normally after supplemented with 0.
Escape from the
Edition State Return to the
Primary Menu
Save the revised value
and return to the
secondary menu Turn right once and
revise the flickering-bit
parameter 0-1 Shift the flickering bit
by 2 bits and skip to the
highest bit
Turn left third time and
revise the flickering-bit
parameter 6-3
Function Group: P2
Auxiliary Operation
Function Code: P2.02
Jogging Deceleration
Time
Jogging Acceleration
Time
1003.0 s
Jogging Acceleration
Time
3.0 s
Jogging Acceleration
Time
3.0 s
Stop
Parameter
Display State
Enter the edition state
and display the
primary menu
Turn twice to select
function group P2 Confirm the function
group and enter the
secondary menu Turn once to select
function code P2.01 Confirm the function
code and enter the
tertiary menu
LCD
Key
Operation
Pre-compensation
Frequency
0.00 Hz
Function Group: P0
Basic Function
Function Group: P2
Auxiliary Operation
Function Code: P2.00
Jogging Operation
Frequency
Function Code: P2.01
Jogging Acceleration
Time
Jogging Acceleration
Time
6.0 s