Agilent Technologies J-BERT N4903B Скачать руководство пользователя страница 230

Страница: 230 / 572

How to Export Measurements

To export the measurement data into a .txt file for later use in external spreadsheet

applications:

After your measurement has finished and the results are displayed, select

Export Data

from the

Analysis

menu.

In the

Export

dialog box, select the path and file name for the .txt file.

Alternatively, you can activate the

Clipboard

checkbox to copy the data to the

clipboard. In this case you can then paste it into any other application.

Press the

Format Options

button to open the

Export/Logfile Format

dialog box.

Make further selections for the format of the exported data. Press

to close

the dialog box.

Press

to export the data to the specified destination.

How to Compare Measurement Results

If you intend to repeat a measurement with different settings, you may wish to

preserve the current results for easier comparison. This can be done with all

measurements (except Error Location Capture) by copying the results.

In the lower left-hand corner of the measurement window, select the measured

terminal by tipping on it.

Select

Copy

from the

Edit

menu.

If you have a mouse connected to your Serial BERT, you can directly copy the

measurement via the context menu.

Open the

Edit

menu (or context menu) once more and select

Paste

This inserts a copy of the chosen measurement results. For an Output Levels

measurement, this looks as shown below:

Advanced Analysis

230

Agilent J-BERT N4903B High-Performance Serial BERT

Содержание J-BERT N4903B





























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание J-BERT N4903B

Отзывы:

Agilent Technologies J-BERT N4903B, Руководство пользователя, Страница: 230 / 572

Результаты поиска

Содержание J-BERT N4903B

Отзывы: