YOKOGAWA GS820 User Manual Download Page 158

Page: 158 / 286

11.1 Saving the Setup Data

Procedure

Press

SETUP

to display the saved files and the SETUP menu.

Press the

Save Setup

soft key to display the area for saving the setup data.

• RamDisk:

the volatile storage (GS820RAM)

• Setup1 to Setup4: the non-volatile storage (GS820ROM)

Saving to the Volatile Storage (GS820RAM)

Press the

RamDisk

soft key.

While saving, the characters of the RamDisk soft key is highlighted.

When the save operation is completed, the display returns to the SETUP menu.

Saving to the Non-Volatile Storage (GS820ROM)

Press any of the

Setup1

Setup4

soft keys.

While saving, the characters of the soft key that you pressed is highlighted.

When the save operation is completed, the display returns to the SETUP menu.

Chapter 11 Other Functions

11-1

IM 765601-01E

Other Functions

App

Index

Summary of Contents for GS820































































































































































































































































































Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands

YOKOGAWA GS820, User Manual

Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands