manualshive.com logo in svg

YOKOGAWA GS820, User Manual

Share
Download
YOKOGAWA GS820 User Manual Download Page 3

 

Thank you for purchasing the GS820 Multi Channel Source Measure Unit.

This user’s manual contains useful information about the instrument’s functions and 

operating procedures and lists the handling precautions of the GS820. To ensure correct 

use, please read this manual thoroughly before beginning operation. Keep this manual in 

a safe place for quick reference in the event a question arises.

List of Manuals

The following manuals, including this one, are provided as manuals for the GS820. 

Please read all manuals.

Manual Title

Manual No.

Description

GS820 Multi Channel Source 
Measure Unit User’s Manual

IM 765601-01E

This manual. Explains all the functions of 
the GS820 and their operating procedures.

GS820 Multi Channel Source 
Measure Unit User’s Manual

IM 765601-92

Document for China

 

The “E” in the manual number is the language code.

Contact information of Yokogawa offices worldwide is provided on the following sheet.

Document No.

Description

PIM 113-01Z2

List of worldwide contacts

Notes

•  The contents of this manual are subject to change without prior notice as a result of 

continuing improvements to the instrument’s performance and functions. The figures 

given in this manual may differ from those that actually appear on your screen.

•  Every effort has been made in the preparation of this manual to ensure the accuracy 

of its contents. However, should you have any questions or find any errors, please 

contact your nearest YOKOGAWA dealer.

•  Copying or reproducing all or any part of the contents of this manual without 

YOKOGAWA’s permission is strictly prohibited.

•  The TCP/IP software of this product and the document concerning the TCP/IP 

software have been developed/created by YOKOGAWA based on the BSD Networking 

Software, Release 1 that has been licensed from University of California.

Trademarks

•  Microsoft, Internet Explorer, MS-DOS, Windows, Windows NT, and Windows XP are 

either registered trademarks or trademarks of Microsoft Corporation in the United 

States and/or other countries.

•  Adobe, Acrobat, and PostScript are trademarks of Adobe Systems Incorporated.
•  For purposes of this manual, the ® and TM symbols do not accompany their 

respective registered trademark names or trademark names.

•  Other company and product names are registered trademarks or trademarks of their 

respective holders.

Revisions

•  1st Edition :  August 2007
•  2nd Edition:  July 2012
•  3rd Edition:  September 2013
•  4th Edition: 

January 2015

•  5th Edition: 

March 2016

•  6th Edition: 

October 2017

6th Edition: October 2017 (YMI)

All Rights Reserved, Copyright © 2007 Yokogawa Electric Corporation
All Rights Reserved, Copyright © 2012 Yokogawa Test & Measurement Corporation

i

IM 765601-01E

Summary of Contents for GS820































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands