manualshive.com logo in svg

YOKOGAWA GS820, User Manual

Share
Download
YOKOGAWA GS820 User Manual Download Page 125

6.5 

Starting the Sweep Operation

Procedure

The sweep operation starts when a sweep start source is applied or when you press 

START

.

Explanation

Starting the Liner Sweep, Log Sweep, or Programmable Sweep

The initial state is Waiting for Sweep Start. The GS820 will be able to receive the source 

trigger once the sweep operation is started from the Waiting for Sweep Start state. After 

receiving the source trigger the number of times equal to sweep count × repeat count, 

the sweep operation stops, and the GS820 returns to the Waiting for Sweep Start state.

Note

•  Source triggers that are received during the Waiting for Sweep Start state are discarded.
•  If a new sweep start occurs while the sweep operation is in progress, the on-going sweep 

operation is aborted, and an sampling error occurs.

<<Corresponding Command Mnemonic>>

:STARt

6-12

IM 765601-01E

Summary of Contents for GS820































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands