YOKOGAWA GS820 User Manual Download Page 162

Page: 162 / 286

11.4 Selecting the Display Brightness and Turning

the Display OFF

Procedure

Press

SHIFT+SETUP (MISC)

to display the MISC menu.

Press the

Display

soft key to show the DISPLAY menu.

Selecting the Display Brightness

Press the soft key corresponding to the desired brightness.

Turning the Display OFF

Press the

Off Exec

soft key.

The display is turned OFF, and the SHIFT key blinks until the display is turned ON again.

To turn the display back ON, press any key or turn the

rotary knob

Explanation

Selecting the Display Brightness

You can select the display brightness in the range of 1 to 4. The darkest setting is 1, and

the brightest setting is 4.

Turning the Display OFF

Turning the display OFF extends the life of the display and suppresses the noise that the

display generates. In addition, the communication speed improves slightly.

Note

The settings are retained even if the GS820 is turned OFF.

<<Corresponding Command Mnemonic>>

:SYSTem:DISPlay[:STATe] 1|0|ON|OFF

:SYSTem:DISPlay:BRIGht <integer>|MINimum|MAXimum|UP|DOWN

11-5

IM 765601-01E

Other Functions

App

Index

Summary of Contents for GS820































































































































































































































































































Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands

YOKOGAWA GS820, User Manual

Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands