YOKOGAWA GS820 User Manual Download Page 84

Page: 84 / 286

3.7

Setting the Date, Time, and the Time Difference
from GMT (Greenwich Mean Time)

Procedure

Press

SHIFT+SETUP (MISC)

to display the MISC menu.

Press the

Next 1/2

soft key.

Press the

Time Adjust

soft key.

Setting the Date and Time

Press the

Clock Adjust

soft key to display the date/time setup screen.

Press the

Edit

soft key.

Press the

and

keys to move the cursor to the desired position.

Use the

rotary knob

numeric keys

to set the date and time.

Press the

Set

soft key to confirm the setting.

Synchronizing the Clock

Press the

Zero Adjust

soft key to synchronize the clock by resetting the seconds

to zero.

If the seconds is greater than equal to 30 seconds, the clock is set to 0 seconds of the next

minute.

3-15

IM 765601-01E

Instrument Preparation and Common Operations

App

Index

Summary of Contents for GS820































































































































































































































































































Search results

Summary of Contents for GS820

Reviews:

Brands by name

Popular brands

YOKOGAWA GS820, User Manual

Search results

Summary of Contents for GS820

Reviews:

Brands by name

Popular brands