YOKOGAWA GS820 User Manual Download Page 163

Page: 163 / 286

11.5 Selecting the CSV File Format

Procedure

Press

SHIFT+SETUP (MISC)

to display the MISC menu.

Press the

CSV Setting

soft key to display a menu for selecting the CSV file

format.

Press the

DecPoint

Separate

soft key to select the CSV file format.

The two soft keys are linked.

Explanation

The following format combinations are available.

• The decimal point is a period, and the separator is a comma.
• The decimal point is a comma, and the separator is a semicolon.

The default setting is the combination of a period and a comma.

11-6

IM 765601-01E

Summary of Contents for GS820































































































































































































































































































Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands

YOKOGAWA GS820, User Manual

Search results

Summary of Contents for GS820

Reviews:

Related manuals for GS820

Brands by name

Popular brands