manualshive.com logo in svg

YOKOGAWA GS820, User Manual

Share
Download
YOKOGAWA GS820 User Manual Download Page 217

16-24

IM 765601-01E

[:CHANnel<n>]:SOURce[:CURRent]: 
PULSe:BASE/?

Function  Sets the pulse base value for current pulse source 

mode or queries the current setting.

Syntax

 [:CHANnel<n>]:SOURce[:CURRent]:PULSe:

BASE <current>|MINimum|MAXimum

 

<current>   Specify any current pulse base 

value.

 

MINimum  Sets the minimum value.

 

 

   

 In fixed range mode, it is set to the 

minimum value within the range.

 

 

   

 In auto range mode, it is set to 

‒3.2 A (765601/765602) or ‒1.2 A 
(765611/765612).

 

MAXimum  Sets the maximum value.

 

 

   

 In fixed range mode, it is set to the 

maximum value within the range.

 

 

   

 In auto range mode, it is set to 

3.2 A (765601/765602) or 1.2 A 
(765611/765612).

 [:CHANnel<n>]:SOURce[:CURRent]:PULSe:

BASE?

 

→ <current>  The present current pulse base 

value.

Example

  :SOUR:CURR:PULS:BASE 0.75

 

:CHAN2:SOUR:CURR:PULS:BASE 5mA

 :CHAN1:SOUR:CURR:PULS:BASE?

Description If CURRent is omitted, the GS820 assumes that 

the present source function was specified.

[:CHANnel<n>]:SOURce[:CURRent]:ZERO:
IMPedance/?

Function  Sets the impedance (high or low) for current zero 

source or queries the current setting.

Syntax

 [:CHANnel<n>]:SOURce[:CURRent]:ZERO: 

IMPedance HIGH|LOW

 

HIGH    Sets to high impedance.

 

LOW    Sets to low impedance.

 [:CHANnel<n>]:SOURce[:CURRent]:ZERO: 

IMPedance?

 

→ HIGH 

 The current zero source is set to high 

impedance.

 

→ LOW  

 The current zero source is set to low 

impedance.

Example

  :SOUR:CURR:ZERO:IMP LOW

 

:CHAN2:SOUR:CURR:ZERO:IMP HIGH

 :CHAN1:SOOR:CURR:ZERO:IMP?

Description If CURRent is omitted, the GS820 assumes that 

the present source function was specified.

16.2  Commands

Summary of Contents for GS820































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands