manualshive.com logo in svg

YOKOGAWA CW140, User Manual, Page: 94 / 292

Share
Download
YOKOGAWA CW140 User Manual Download Page 94

IM CW140-E

9-6

9.3 Integration in Electric Energy Measure Mode

●

Outputting Integrated Data

This paragraph explains how to output data acquired during an interval from

the start to the end of integration.  You can change/define settings related to

data output by pressing the 

  (SETUP) key in the Electric Energy

Measure mode.

• Data Output Setting

DATA OUTPUT:

Select from the ON and OFF options.

• Condition Settings for Data Output (with "DATA OUTPUT" set to ON)

OUTPUT INTERVAL: Set a value between 2 minutes and 1000 hours, in

1-minute increments.

OUTPUT MEDIA:

Select:

"MEMORY" to save in internal memory;

"FD" to save on a floppy disk; or

"PRINTER" to print.

FILENAME:

Type the file name of data to be saved.

SAVE/PRINT ITEM:

Select the data item to be saved or printed.

SEE ALSO

Section 9.4, "Setup Data Items of Electric Energy Measure Mode," for details on the setup data items.

TIP

You are not allowed to set the time interval from the start to the end of integration at a value smaller than

the OUTPUT INTERVAL setpoint.  If you set such a value, the CW140 shows an error message when

you press the 

 key.

Summary of Contents for CW140





































































































































































































































































































Reviews:

No comments