YOKOGAWA CW140, User Manual, Page: 133 / 292

12-13
IM CW140-E
Harmonics Measure Mode
12
12.5 Setup Data Items of Harmonics Measure Mode
Setup Data Items of Harmonics Measure Mode (Save/Print items)
To select/deselect data items to be saved/printed, select between the ON and
OFF options of each of the fields "SELECT ITEM," "SELECT ELEMENT,"
"SELECT ORDER," "ALL-POWER, "ALL-P.F.," "EVENT INPUT" and "THD
(IEEE)" and "THD (CSA)."
●
Configuration of Screen for Setting Output Options
Page 1/2
SELECT ITEM
SELECT ELEMENT
Page 2/2
SELECT ORDER
ALL-P.F.
EVENT INPUT
THD (IEEE), (CSA)
• Display each page of the screen with the (NEXT) key, as explained
below.
Page 1/2
(NEXT)
Page 2/2
(NEXT)
●
Changing the Settings
• Page 1/2 of the screen
SELECT ITEM (Default: ON)
RMS CONTENT PHASE ALL-RMS
VOLT. ON ON ON ON
AMP. ON ON ON ON
POWER CONTENT PHASE ALL-POW
POWER ON ON ON ON
SELECT ELEMENT (Default: ON)
V1 V2 V3 I1 I2 I3 P
ON ON ON ON ON ON ON
Information provided by this screen differs depending on the type of wiring.
: ON
: OFF
With the key,
select a data item or items under "SELECT ITEM" and/or "SELECT ELEMENT" that you want to change.
With the relevant key, select between the ON and OFF options of the selected data item or items.