YOKOGAWA CW140 User Manual Download Page 55

Page: 55 / 292

7-3

IM CW140-E

Common Functions of All Modes

7.2

Checking Wiring

WARNING

• Checking wiring is important to ensuring safe performance and accurate measurement. Refer

to Chapter 3 and then carry out the necessary precautions for safe measurement and ensure
that the connections have been made correctly.

• Make sure the connection of the voltage probe, and H/L directions and measurement positions

of the current sensing clamp are correct.

●

Check Items

The following items will be checked and judged, and then the results of each

item will be displayed as either OK or NG.

VOLTAGE INPUT
CURRENT INPUT
VOLT. PHASE SEQUENCE (for three-phase only)
CLAMP DIRECTION ERR.
FREQUENCY SOURCE

SEE ALSO

Page 7-5, “Check Items.”

NOTE

• Measurement is not performed while wiring is being checked (D/A output is 0 V).

• Voltage and current ranges are set to AUTO while wiring is being checked and will retrieve the

preset value after checking.

Frequency source

The frequency source indicates the source selected for measuring the frequency

of voltage inputs (V1 to V3) and current inputs (CH1 to CH4) in the system

settings.

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 55 / 292

Search results

Summary of Contents for CW140

Reviews: