YOKOGAWA CW140 User Manual Download Page 70

Page: 70 / 292

IM CW140-E

7-18

7.6

Averaging Function

As power in the measured lines may greatly fluctuate, the CW140 is facilitated

with a function to calculate the moving average. The averaging function can

be set to on or off on page 1/2 of the system setting screen or on the last page

of the setup screen in each measurement mode.

Selected number of averaging: 2 to 10 cycles

●

Moving Average Equation

Dn = (Mn – (m – 1) + Mn – (m – 2) + ... + Mn – 1 + Mn) / m

m: Number of averaging cycles to be set
Mn: Measured value at nth measurement
Dn: Moving average at nth measurement (on-screen reading)

m cycles

TIP

• The averaging function cannot be used when in harmonics measure mode because the sampling

method used in this mode is different from other modes.

• For integrated values of electric power and demand, the averaging function does not work even if it is

set to on.

SEE ALSO

For details on the settings, see page 1/2 of the system setting screen, p 5-2, or the last page of the setup

screen in each measurement mode:

Instant mode: p. 8-13

Electric energy mode: p. 9-11

Demand mode: p. 11-12

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 70 / 292

Search results

Summary of Contents for CW140

Reviews: