YOKOGAWA CW140 User Manual Download Page 154

Page: 154 / 292

IM CW140-E

15-2

15.2 Connecting CW140 through RS-232C

Interface

When connecting the CW140 to a computer, make sure the methods used for

handshake, data transmission rate, and data format are the same on both the

CW140 and the computer.

For details, see the following pages. Also, be sure to use interface cables that

match the specifications of the CW140.

Connector and Signal Names

6 7 8 9

Pin 2: RD (Receive Data)

Data received from the personal computer.

Signal direction: Input

Pin 3: SD (Send Data)

Data transmitted to a personal computer.

Signal direction: Output

Pin 5: SG (Signal Ground)

Ground for signals.

Pin 7: RS (Request to Send)

Signal used for handshake when receiving data from a personal

computer.

Signal direction: Output

Pin 8: CS (Clear to Send)

Signal used for handshake when transmitting data to a personal

computer.

Signal direction: Input

Pins 1, 4, 6, and 9 are not used.

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 154 / 292

Search results

Summary of Contents for CW140

Reviews: