YOKOGAWA CW140 User Manual Download Page 125

Page: 125 / 292

12-5

IM CW140-E

Harmonics Measure Mode

12.3 Working with the Function Keys

This section explains how the function keys for the Harmonics Measure mode

work.

(CHANGE):

Switches between GRAPH and TABLE display modes

(see Sections 12.1 and 12.2, "Showing Tables in

Harmonics Measure Mode" and "Showing Graphs in

Harmonics Measure Mode").

(SETUP):

Shows setup data items of the Harmonics Measure

mode (see Section 12.5, "Setup Data Items of

Harmonics Measure Mode") on pages 1/2 and 2/2 of

the HARM. SET screen.

Selects from the data items.

: Changes or sets the value.

(NEXT): Moves to the next page (screen).

Confirms the setting.

ESC

Cancels the setting.

(FILE):

Enables you to use the file functions (see Chapter 13,

"File Functions").

(LOAD): Reads a file from internal memory/

floppy disk.

(SAVE): Saves a file in internal memory/on

floppy disk.

(PRINT): Prints data (DISP VAL, SET ITEM

and SETUP data items).

• If labeled as "TABLE"; Changes the order of harmonic by selecting

between the ODD and EVEN options.

• If labeled as "GRAPH"; Changes the vertical axis format by selecting

between the LINEAR and LOG options.

(HOLD):

Holds the on-screen readings.

Holding: The screen shows the

mark in the

upper-middle area of the display.

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 125 / 292

Search results

Summary of Contents for CW140

Reviews: