manualshive.com logo in svg

YOKOGAWA CW140, User Manual, Page: 24 / 292

Share
Download
YOKOGAWA CW140 User Manual Download Page 24

IM CW140-E

3-2

3.1 Handling Precautions

●

After Use

After use, disconnect the power cord from the outlet.

●

 Long Absence of Use

If the instrument will not be used for a prolonged period, remove the batteries

(AA-size alkaline batteries or NiMH battery pack) from the instrument.

Precautions for Use of the Clamp

CAUTION

 • The clamping CT (current transformer) is precision assembled to ensure high performance.

When using the clamp, do not apply any intense mechanical shock, vibration or force to the
clamping CT.

 • If dust or any other foreign matter gets in the clamping CT, do not shut the clamping cores

tight.  First remove the dust and then make sure the clamping cores on both sides close
smoothly.

Summary of Contents for CW140





































































































































































































































































































Reviews:

No comments