YOKOGAWA CW140, User Manual, Page: 225 / 292

App 2-25
IM CW140-E
Communication Commands
App
Appendix 2. Communication Commands
:HARMonics:DISPlay:ITEM
Function Sets/queries the analysis item
shown on measurement screen.
Syntax
:HARMonics:DISPlay:ITEM?
:HARMonics:DISPlay:ITEM {<NRf>}
<NRf> = 0: Rms value
1: Power
2: Content
3: Phase angle
:HARMonics:DISPlay:MODE
Function Sets/queries the mode of
measurement screen.
Syntax
:HARMonics:DISPlay:MODE?
:HARMonics:DISPlay:MODE {<NRf>}
<NRf> = 0: Graph
1: Table
:HARMonics:STATe?
Function Queries the measurement status.
Syntax
:HARMonics:STATe?
<NRf>= 0: Stop
1: Ready for measurement
2: Logging in progress
:HARMonics:STORe?
Function Queries all the settings relating to
output destination and data items to
be saved.
Syntax
:HARMonics:STORe?
:HARMonics:STORe:STATe
Function Sets/queries whether logging is set
to ON or OFF.
Syntax
:HARMonics:STORe:STATe?
:HARMonics:STORe:STATe
{<Boolean>}
:HARMonics:STORe:FD
Function Sets/queries whether data output to
a floppy disk is set to ON or OFF.
Syntax
:HARMonics:STORe:FD?
:HARMonics:STORe:FD
{<Boolean>}
:HARMonics:STORe:FILEname
Function Sets/queries the name of a file to be
saved.
Syntax
:HARMonics:STORe:FILEname?
:HARMonics:STORe:FILEname
<Filename>
<Filename> = Up to 8 characters
:HARMonics:STORe:INTErval
Function Sets/queries the output time
interval.
Syntax
:HARMonics:STORe:INTErval?
:HARMonics:STORe:INTErval
{<NRf1>, <NRf2>}
<NRf1> = Hour: 0 to 1000
<NRf2> = Minute: 0 to 59
:HARMonics:STORe:ITEM?
Function Queries all the settings relating to
data items to be saved.
Syntax
:HARMonics:STORe:ITEM?
:HARMonics:STORe:ITEM:CSA
Function Sets/queries whether THD/CSA
data output is set to ON or OFF.
Syntax
:HARMonics:STORe:ITEM:CSA?
:HARMonics:STORe:ITEM:CSA
{<Boolean>}
:HARMonics:STORe:ITEM:EVENt
Function Sets/queries whether event data
output is set to ON or OFF.
Syntax
:HARMonics:STORe:ITEM:EVENt?
:HARMonics:STORe:ITEM:EVENt
{<Boolean>}
:HARMonics:STORe:ITEM:I<x>
Function Sets/queries whether current data
output is set to ON or OFF.
Syntax
:HARMonics:ITEM:I<x>
{<Boolean>}
Current element <x> = 1 to 3