manualshive.com logo in svg

YOKOGAWA CW140, User Manual, Page: 75 / 292

Share
Download
YOKOGAWA CW140 User Manual Download Page 75

8-3

IM CW140-E

Instant Measure Mode

8

●

Display of Setup Conditions

As setup conditions, the screen shows the settings of the following four data

items.

WIRING:

V RANGE:

F SOURCE:

A RANGE:

• Changing the Setup Conditions

WIRING field:

Change with the 

 key,

and then press the

V RANGE field:

Change with the 

 key,

A RANGE field:

Change with the 

 key,

relevant function key.

F SOURCE field: Shows the input signal whose frequency is being

measured.  To change the setting of the data item

"Frequency Source," select the Instant Setting screen by

pressing the 

 (SETUP) key. Then, press the 

key twice to show page 3/3 of the screen. The default

value is V1.  Now change the setting and press the 

(CHANGE) key.

FREQUENCY SOURCE

V1

V2

V3

I1

I2

I3

Press the 

 key.

SEE ALSO

Page 7-16, for details on the setting of the data item "Frequency Source."

8.1

Detailed View of Data Items on Instant Measure Mode Screen

Summary of Contents for CW140





































































































































































































































































































Reviews:

No comments