YOKOGAWA CW140, User Manual, Page: 230 / 292

IM CW140-E
App 2-30
Appendix 2. Communication Commands
:INTEgrate:NEGWatt
Function Sets/queries whether regenerative
power calculation is set to ON or
OFF.
Syntax
:INTEgrate:NEGWatt?
:INTEgrate:NEGWatt
{<Boolean>}
:INTEgrate:STARt?
Function Queries all the settings relating to
the start of measurement.
Syntax
:INTEgrate:STARt?
:INTEgrate:STARt:EXECute
Function Starts measurement.
Syntax
:INTEgrate:STARt:EXECute
:INTEgrate:STARt:METHod
Function Sets/queries the method for starting
measurement.
Syntax
:INTEgrate:STARt:METHod?
:INTEgrate:STARt:METHod
{<NRf>}
<NRf> = 0: Time
1: Trigger
2: Manual
:INTEgrate:STARt:TIME
Function Sets/queries the starting time of
measurement.
Syntax
:INTEgrate:STARt:TIME?
:INTEgrate:STARt:TIME
{<NRf1>, <NRf2>, <NRf3>,
<NRf4>, <NRf5>}
<NRf1> = Year: 1999 to 2098
<NRf2> = Month: 1 to 12
<NRf3> = Day: 1 to 31
<NRf4> = Hour: 0 to 23
<NRf5> = Minute: 0 to 59
:INTEgrate:STATe?
Function Queries the measurement status.
Syntax
:INTEgrate:STATe?
:INTEgrate:STATe
<NR1>= 0: Stop
1: Ready for measurement
2: Integration in progress
:INTEgrate:STOP?
Function Queries all the settings relating to
the end of measurement.
Syntax
:INTEgrate:STOP?
:INTEgrate:STOP:EXECute
Function Stops measurement.
Syntax
:INTEgrate:STOP:EXECute
:INTEgrate:STOP:INTErval
Function Sets/queries the end-of-
measurement timer setting.
Syntax
:INTEgrate:STOP:INTErval?
:INTEgrate:STOP:INTErval
{<NRf1>, <NRf2>, <NRf3>}
<NRf1> = Hour: 0 to 1000
<NRf2> = Minute: 0 to 59
<NRf3> = Second: 0 to 59 (in 10-
second increments)
:INTEgrate:STOP:METHod
Function Sets/queries the method for
stopping measurement.
Syntax
:INTEgrate:STOP:METHod?
:INTEgrate:STOP:METHod
{<NRf>}
<NRf> = 0: Time
1: Trigger
2: Manual
3: Timer