YOKOGAWA CW140, User Manual, Page: 100 / 292

IM CW140-E
9-12
9.4 Setup Data Items of Electric Energy Measure Mode
Setup Data Items of Electric Energy Measure Mode
To select/deselect data items to be saved/printed, select between the ON and
OFF options of each of the fields "VOLT.," "AMP.," "POWER," "ELEC.
ENERGY" and "EVENT INPUT" (five items as a group).
For voltage and current, information saved/printed differs depending on the
type of wiring. See the following table.
Data Items to Be Saved/Printed
Wiring Group Saved/Printed Items
The data items "voltage" and "current" take rms values.
1 φ 2W Voltage V1
Current I1
Power Active power, reactive power, apparent power,
power factor, phase angle, frequency
Electric energy Active electric energy, regenerative energy, lagging
reactive electric energy, leading reactive electric energy
1 φ 3W Voltage V1 V2 (V3)
(3 φ 3W) Current I1 I2 (I3)
Power Active power, reactive power, apparent power,
power factor, phase angle, frequency
Electric energy Active electric energy, regenerative energy, lagging
reactive electric energy, leading reactive electric energy
3
φ
3W3i Voltage V1 V3
Current I1 I2 I3
Power Active power, reactive power, apparent power,
power factor, phase angle, frequency
Electric energy Active electric energy, regenerative energy, lagging
reactive electric energy, leading reactive electric energy
3
φ
4W Voltage V1 V2 V3
Current I1 I2 I3
Power Active power, reactive power, apparent power,
power factor, phase angle, frequency
Electric energy Active electric energy, regenerative energy, lagging
reactive electric energy, leading reactive electric energy
Event input Status H/L of event input