YOKOGAWA CW140 User Manual Download Page 43

Page: 43 / 292

5-1

IM CW140-E

System Setting

Chapter 5. System Settings

5.1 System Settings

This section describes system settings, including calculation selection,

auxiliary function settings, and RS-232-C settings. Each setting has been set

to the default value before shipment and should be changed as required.

●

Screen Configuration

The System Setting screen consists of 2 pages, pages 1/2 and 2/2.

SEE ALSO

For the contents of each screen and setting details, see Table "System Settings" on pages 5-2 and 5-3.

●

Basic Operation for Setting/Modification

Key operation

Retrieves the Top Menu.

System setting screen
appears.

Using the Cursor key,
select the system setting.
(It becomes highlighted.)

Using the Cursor key,
select an item to set.

Using the function keys,
change the settings on
screen 1/2.

Press the F5 key, to
change the next screen.

Select system setting.

(It becomes highlighted.)

ESC

Using the function keys,
change the settings on
screen 2/2.

Applies the changes you
made to the settings.

Press the escape key to cancel all
the changes you made.

SYSTEM RESET

SYSTEM SET

T O P M E N U

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 43 / 292

Search results

Summary of Contents for CW140

Reviews: