YOKOGAWA CW140, User Manual, Page: 103 / 292

10-1
IM CW140-E
Key
10
Chapter 10. Key
10.1 Simple Electric Energy Measurement
with Key
With the key, electric energy can soon be measured without starting from
the TOP MENU screen. The setting screen presented by the key
consists of the LAST CONDITION screen and SETTING CONDITION
screens 1 to 4. These SETTING CONDITION screens are given condition
settings beforehand, which can be changed and saved as necessary.
●
Defaults of Condition Settings
The defaults of SETTING CONDITION screens 1 to 4 are the same as those
of the setup data items of the Electric Energy Measure mode, except for the
wiring settings shown below.
SETTING CONDITION 1 SETTING CONDITION 2 SETTING CONDITION 3 SETTING CONDITION 4
1 φ 2W 1 φ 3W 3 φ 3W 3 φ 4W
SEE ALSO
Section 9.4, "Setup Data Items of Electric Energy Measure Mode"
●
Information of Each Setting
Pressing the key shows a screen of condition settings. The setting
screen consists of the LAST CONDITION screen and SETTING CONDITION
screens 1 to 4.
Each press of the key cycles through the screens, as shown below.
LAST CONDITION
screen
SETTING
CONDITION 3
SETTING
CONDITION 2
SETTING
CONDITION 4
SETTING
CONDITION 1