manualshive.com logo in svg

YOKOGAWA CW140, User Manual, Page: 134 / 292

Share
Download
YOKOGAWA CW140 User Manual Download Page 134

IM CW140-E

12-14

12.5 Setup Data Items of Harmonics Measure Mode

• Page 2/2 of the screen

SELECT ORDER (Default: The ODD option is set to ON.)

ORD. 1

2

3

4

5

6

ODD ON

OFF

ON

OFF

ON

OFF

7

8

9

10

11

12

13

ON

OFF

ON

OFF

ON

OFF

ON

F1 (ALL): Sets all orders to ON.

F2 (ODD): Sets all odd-numbered orders to ON and 
all even-numbered orders to OFF.

F3 (SELECT): Select ON/OFF for each order.

: ON

: OFF    

Change the setting.

With the                  key, select the order whose setting you want to change.

: ON

: OFF    

Change the setting.

The default of all four data items is ON, as shown below:
ALL-P.F.

: ON

EVENT INPUT : ON
THD (IEEE)

: ON

THD (CSA)

: ON

With the                  key, select the order whose setting you want to change.

TIP

Even if you set data items to be saved/printed, they are not saved/printed if the LOGGING setup data

item is set to OFF.

You are not allowed to set the SAVE/PRINT ITEM data item so that the number of selected data items

exceeds 250.  If you fail to follow this rule, the CW140 shows an error message.

Summary of Contents for CW140





































































































































































































































































































Reviews:

No comments