YOKOGAWA CW140 User Manual Download Page 163

Page: 163 / 292

17-1

IM CW140-E

Auxiliary Functions

Chapter 17. Auxiliary Functions

17.1 Auxiliary Functions

●

Clock

LCD screen

2000/01/01 00:00:00

Accuracy:

100 ppm

Indication: Date:

Year/Month/Day

Time: hour: minute:second

Date and time can be modified to precise values on the System Setting

screen.

Default: JST (Japan st’d Time)

When the power is turned off, a built-in battery is used to save the set date

and time.

TIP

Both the date and time are displayed together on the Top Menu and when setting the clock, however, only

the time is displayed during continuous measurement.

●

Selecting Language

You can switch display language on the LCD between English, French,

Spanish, German, Italian and Japanese.

System default setting: English

<<Selecting Operation>>

Operate the following Steps when you select German, for example, from

English.

(1) Press

key to display the Top Menu screen.

(2) Select the System Settings on the Top Menu screen with

key, and

press

key to display the System Set Screen.

(3) Select the [ System Set ] (highlighted), and press

key to display the

SYSTEM SET (1/2) screen.

(4) Press

key to display the SYSTEM SET (2/2) screen.

(5) Select the [ LANGUAGE] with

key.

(6) Press the

key to display the language list.

(7) Select the Deutsch (German) with

key and press the

key.

(8) Press the

key again to complete the setting.

The Top Menu screen written in German appears.

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 163 / 292

Search results

Summary of Contents for CW140

Reviews: