YOKOGAWA CW140, User Manual, Page: 124 / 292

IM CW140-E
12-4
12.2 Showing Graphs in Harmonics Measure Mode
●
Selecting from Options of MEASURE ELEMENT and ANALYSIS ITEM
Screens for a Graph
In Harmonics Measure mode, press (DISP.).
(GRAPH): Then, press this key.
The following screen appears.
(TABLE)
(V1)
(V2)
(V3)
(I1)
(NEXT)
(I2)
(I3)
(P)
(NEXT)
(Available options differ depending on the type of wiring.)
(RMS)
(CONTENT)
(PHASE)
When the MEASURE ELEMENT
Data Item Is Voltage or Current
(POWER)
(CONTENT)
(PHASE)
When the MEASURE ELEMENT
Data Item Is Power
ESC
With the key,
you can select between the DISPLAY and NO DISPLAY options of the LOGGING field.
(DISPLAY)
(NO DISPLAY)
Press the key to cancel the selection.
After selection, press the key to confirm the selection.
The display shows a table.
With the key,
select from the following options of the ELEMENT field.
With the key,
select from the following options of the ANALYSIS field.
DISPLAY: GRPH
ELEMENT: V1
ANALYSIS: RMS
LOGGING: DISPLAY
TIP
The LOGGING data item is shown only when "LOGGING" is set to ON.