YOKOGAWA CW140 User Manual Download Page 78

Page: 78 / 292

IM CW140-E

8-6

• Symbol Description (for selection of data items other than V1, V2, V3, I1, I2

and I3)

UPPER

P: Active power
Q: Reactive power
VA: Apparent power

MIDDLE

P: Active power
PF: Power factor
PA: Phase angle

LOWER

P: Active power
F: Frequency
UR:Three-phase unbalance factor

UPPER

MIDDLE

LOWER

TIP

• The choice of data items V1 to V3 and I1 to I3 varies depending on the type of wiring.

• If the CW140 is wired to a 2-load system, the same data item is selected for both loads.

• If you change the wiring type and the selected data item is not identified as an actual input on the

wiring, the default data item is selected.

8.3

Expanded View of Data Items on Instant Measure Mode Screen

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 78 / 292

Search results

Summary of Contents for CW140

Reviews: