YOKOGAWA CW140, User Manual, Page: 117 / 292

11-11
IM CW140-E
Demand Measure Mode
11
11.5 Setup Data Items of Demand Measure Mode
Setup Data Items of Demand Measure Mode
Table 2 of Setup Data Items
2/3
SAVE/PRINT
ITEM "Data Items to Be
Saved/Printed"
on page 11-13 ON for all items
D/A OUTPUT
(Optional)
Section 14.1,
"Optional D/A
Output" OFF for all
channels
ON
OFF
For a 2-load system, use the
to keys.
(CHANGE)
Selects the
channel.
Select between "ON" and "OFF" under each of the VOLTAGE,
CURRENT, POWER, DEMAND and EVENT INPUT data items.
Select from among CH1 to CH4.
Shows options in the
middle of the screen.
Page Setup Data Item Items to Be Selected See Also Default
Confirms the selection.
Confirms the selection.
INTEGRATION
RATE
(If D/A output is
enabled)
TOTAL ENERGY
1 V/5 kWh
Selects the rate.
Pressing the key shows a screen for
rate selection.
1 V/5 kWh, 1 V/10 kWh, 1 V/50 kWh,
1 V/100 kWh, 1 V/500 kWh, 1 V/1 MWh
STANDARD
kWh
Confirms the selection.
Select the position of decimal
point.
Pressing the key shows a screen for
selection.
STANDARD 000.000 0000.00
00000.0
000000
• Position of decimal point
• Unit of measurement
Confirms the selection.
Selects the unit of
meaurement.
Pressing the key shows a screen for
selection.
Wh kWh MWh GWh
PERIOD
ENERGY
STANDARD
kWh
Confirms the selection.
Select the position of decimal
point.
Pressing the key shows a screen for
selection.
STANDARD 000.000 0000.00
00000.0
000000
• Position of decimal point
• Unit of measurement
Confirms the selection.
Selects the unit of
meaurement.
Pressing the key shows a screen for
selection.
Wh kWh MWh GWh