YOKOGAWA CW140 User Manual Download Page 166

Page: 166 / 292

IM CW140-E

17-4

●

Key Lock

You can disable key operations by pressing the

LIGHT

key for at least 3

seconds. When the key lock function is enabled, the

mark is displayed in

the upper-right corner of the screen.

To release the key lock, press the

LIGHT

key for at least 3 seconds again.

TIP

Only the

LIGHT

key can be used when in key-lock mode.

●

Power Saving Mode

1. During continuous measurement (logging, integration, demand)

If no key action is performed for more than 10 minutes, the LCD will be

automatically shut off so that power consumption can be minimized.

Power saving mode can be specified on the System Setting screen.

Default: Off

To recover from power saving mode, press the

LIGHT

key. The LCD is

activated and the backlight comes on.

TIP

The status LED is lit when continuous measurement is being performed.

17.1 Auxiliary Functions

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 166 / 292

Search results

Summary of Contents for CW140

Reviews: