YOKOGAWA CW140 User Manual Download Page 279

Page: 279 / 292

App 6-1

IM CW140-E

Setting Check Sheet

App

Appendix 6. Settings Check Sheet

Appendix

Appendix 6. Settings Check Sheet

Settings Check Sheet

The settings check sheet is attached to facilitate efficient and accurate on-site

settings. Fill in your desired settings on the settings check sheet and use it for

reference in the field.

Description

• A settings check sheet is provided for each measurement mode (total of 4

types).

• The A RANGE setting depends on the clamp setting.

Relationship between the two items is marked with an asterisk (*).

• The D/A output setting is only valid when the optional D/A output is

installed.

• Highlighted characters such as

and

represent factory settings or

default settings for system reset.

• Setting options for items that depend on wiring including the voltage and

current, are not listed.

The voltage and current entry screen depends on the wiring settings. See

page 7-1, or 14-2 to 14-4.

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 279 / 292

Search results

Summary of Contents for CW140

Reviews: