YOKOGAWA CW140, User Manual, Page: 84 / 292

IM CW140-E
8-12
8.5 Setup Data Items of Instant Measure Mode
Setup Data Items of Instant Measure Mode
Table 1 of Setup Data Items
Page Setup Data Item Items to Be Selected See Also Default
1/3
2/3
EXPAND
DISPLAY ITEM Section 8.3,
"Expanded View
of Data Items on
Instant Measure
Mode Screen" UPPER: V1 (voltage)
MIDDLE: I1 (current)
LOWER: P
(active power)
LOGGING OFF
LOGGING START
METHOD
(Only effective if
"LOGGING" is set
to ON)
LOGGING STOP
METHOD
Section 8.4,
"Logging in
Instant Measure
Mode" LOGGING START
METHOD: MANUAL
LOGGING STOP
METHOD: MANUAL
(TIME)
(TRIGGER)
(MANUAL)
(ON): Logging is enabled.
(OFF): Logging is disabled.
FILENAME
(Only effective
if "LOGGING" is
set to ON)
MEMORY/FD
Section 6.3,
"Entering a File
Name"
Section 6.2,
"File name and
File attribute"
Not designated
(CHANGE) : Enters a name of no more than
8 alphanumeric characters.
Not designated: Named automatically as shown below.
AINS XXX.CSV
000 to 999
Select from these options with
the (ON) and
(OFF) keys.
OUTPUT MEDIA
(Only effective if
"LOGGING" is set
to ON) MEMORY
When setting
the time:
(+): Increment
(–): Decrement
Input a value.
Lets you move through the fields
of the date and time setting.
Year
↔ Month ↔ Day ↔ Hour
When setting
the timer:
(+): Increment
(–): Decrement
Input a value.
Lets you move through the fields
of the time setting to set a value,
in 10-second increments, to a
maximum of 1000 hours.
OUTPUT
INTERVAL
(Only effective
if "LOGGING" is
set to ON) 30 min
(Only effective
if "LOGGING" is
set to ON)
Set to a value between 2 minutes and 1000
hours in 1-minute increments.
(+): Increment
(–): Decrement
Input a value.
Lets you move through the digits.
Select data items to be shown in the following fields.
UPPER
MIDDLE
LOWER
(TIME)
(TIMER)
(TRIGGER)
(MANUAL)
MEMORY:
FD:
PRINTER:
Designated:
Hour (and no. of digits) ↔ Minute ↔ Second