YOKOGAWA CW140, User Manual, Page: 148 / 292

IM CW140-E
14-6
14.1 Optional D/A Output
●
D/A Output Settings in Harmonics Measure Mode
The D/A output item in the Harmonics Measure mode setting screen is set to
OFF for CH1 to CH4 by default.
To change the D/A output settings, select the item to change and press the
(CHANGE) key. The following screen appears.
Selecting an Option
for ELEM field
: V1
: V2
: V3
: NEXT
: I1
: I2
: I3
: NEXT
: P
: OFF
: NEXT
Selecting from options of the ITEM field
(if any of V1 to V3 or I1 to I3 is selected
as an option of the ELEM field)
Use the key to select the item to set.
: RMS
: CONTENT
: PHASE
: NEXT
Selecting from options of the ITEM field
(if P is selected as an option of the ELEM field)
: Power
: CONTENT
: PHASE
: NEXT
: ALL_RMS
: THD/IEEE
: THD/CSA
: NEXT
: ALL_POW.
: ALL_P.F.
: NEXT
D/A OUTPUT
CH ELEM ITEM ORD.
CH1
CH2
CH3
CH4 RMS
RMS
RMS
RMS —
—
—
— OFF
OFF
OFF
OFF
• Selection of order
When you have selected the RMS, POWER, CONTENT or PHASE data
item under the SELECT ITEM field for any of the data items under the
SELECT ELEMENT field, use
(+) :
to set the order of harmonic to a value from 1 to 13.
(–) :
If you have selected any item other than those noted above, the CW140
shows a '-' sign, prohibiting you from setting the order.