YOKOGAWA CW140 User Manual Download Page 42

Page: 42 / 292

IM CW140-E

4-2

4.2

Top Menu Screen

The Top Menu is used to select measurement and setting modes. Press the

key to retrieve the Top Menu.

●

Modes Displayed on Top Menu

Measurement Mode

See

Instantaneous value measurement Chapter 8

Electric energy measurement

Chapter 9

Demand measurement

Chapter 11

Harmonics measurement

Chapter 12

Setting Mode

See

System settings

Chapter 5

File handling

Chapter 6

●

Top Menu Display and Selecting Modes

Key operation

The selected mode screen appears.

Retrieves the Top Menu.

Using the Cursor key,
select the desired mode.
(It becomes highlighted.)

T O P M E N U

TIP

You can also use the

key to select the electric energy mode.

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 42 / 292

Search results

Summary of Contents for CW140

Reviews: