YOKOGAWA CW140 User Manual Download Page 165

Page: 165 / 292

17-3

IM CW140-E

Auxiliary Functions

17.1 Auxiliary Functions

●

LCD Contrast

You can adjust (set) the LCD contrast to a value within 1 to 8 on the System

Setting screen.

Contrast default: 4

●

LCD Backlight

The LCD backlight can be turned on/off using the backlight key (

LIGHT

Auto-off function of backlight key

The backlight will be automatically turned off if no key action is performed

for more than 10 minutes while the backlight is on by the

LIGHT

key.

The Auto-off function can be enabled on the System Setting screen.

ON:

The backlight is automatically turned off when no key action

is performed for 10 minutes.

OFF:

The backlight remains lit, even when no key action is

performed for 10 minutes.

Default setting: ON (Auto-off)

TIP

If the backlight is turned off by the Auto-off function, press the

LIGHT

key to turn the light back on again.

●

Beep

The beep is used to confirm key operations (beeps when a key is pressed). It

can be set to on (beep)/off (no beep) on the System Setting screen.

Beep default: On (beep)

Summary of Contents for CW140





































































































































































































































































































Search results

Summary of Contents for CW140

Reviews:

YOKOGAWA CW140, User Manual, Page: 165 / 292

Search results

Summary of Contents for CW140

Reviews: