Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 569 / 981

Configuring Advanced Features
547
Parameters Permitted Values Default
Configures the behavior when pressing the BLF/BLF list DSS key if the monitor is talking
and monitored user is idle.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example
:
blf.enhanced.idle.talking.action = newcall
Note
: It is not applicable to SIP-T19(P) E2 IP phones. It works only if the value of the
parameter “blf.enhanced.idle.enable” is set to 1 (Enabled).
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.callin.enable 0 or 1 0
Description:
Enables or disables the custom configuration when the monitored user is ringing.
0
-Disabled
1
-Enabled, the IP phone will display the custom BLF/BLF List DSS key LED status/icon colors
and perform the custom behavior when pressing the BLF/BLF List DSS key.
Note
: It is not applicable to SIP-T19(P) E2 IP phones.
Web User Interface:
None
Phone User Interface:
None
blf.enhanced.callin.led String Blank
Description:
Configures the custom BLF/BLF List DSS key LED status/icon colors when the monitored
user is ringing.
This value uses the same macro action string syntax as an Enhanced DSS key.
Example
:
blf.enhanced.callin.led = $LEDg1000o$
For
SIP-T54S/T52S/T46G/T46S/T42G/T42S/T41P/T41S/T40P/T40G/T29G/T27P/T27G/T23P/T23
G/T21(P) E2 IP phones, the BLF/BLF List DSS key LED illuminates solid green for 1000ms and
then goes out.