Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 208 / 981

Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
186
The following table lists the page switch key LED to indicate different statuses:
LED Status Description
Off (non-configurable) Indicates non-current pages.
Solid green (non-configurable) Indicates current page.
Flashing red
The BLF monitored user receives an
incoming call on the non-current pages.
You can also customize the page switch key LED status when BLF monitored user receives an
incoming call on the non-current pages.
Procedure
Page tips for expansion module can be configured using the configuration file.
Central Provisioning
(Configuration File)
<y0000000000xx>
.cfg
Configure page tips for the page switch keys
for the expansion modules.
Parameters:
expansion_module.page_tip.blf_call_in.enable
expansion_module.page_tip.blf_call_in.led
Details of the Configuration Parameters:
Parameters Permitted Values Default
expansion_module.page_tip.blf_call_in.enable 0 or 1 1
Description:
Enables or disables the page switch key LED on the expansion module to indicate when BLF
monitored user receives an incoming call on the non-current pages.
0
-Disabled
1
-Enabled
Note
: It is only applicable to EXP50 expansion modules connected to the SIP-T54S/T52S IP
phones.
Web User Interface:
None
Phone User Interface:
None
expansion_module.page_tip.blf_call_in.led String
$LEDr30
0o300$
Description: