Configuring Basic Features
487
Parameters
Permitted Values
Default
0
-Disabled, the IP phone will handle an incoming intercom call like a normal incoming call
while there is already an active call on the IP phone.
1
-Enabled, the IP phone will automatically answer the intercom call while there is already an
active call on the IP phone and place the active call on hold.
Note:
It works only if the values of parameters “features.intercom.allow” and
“call_waiting.enable” are set to 1 (Enabled) and the value of the parameters
“phone_setting.call_appearance.calls_per_linekey” is greater than 1.
Web User Interface:
Features->Intercom->Intercom Barge
Phone User Interface:
Menu->Features->Intercom->Intercom Barge
features.intercom.headset_prior.enable
0 or 1
1
Description:
Configures the channel mode to use when receiving an incoming intercom call.
0
-Speaker Mode
1
-Headset Mode, it works only if you connect the headset to the IP phone and the headset
mode is activated for use.
Web User Interface:
None
Phone User Interface:
None
To configure intercom via web user interface:
1.
Click on
Features
->
Intercom
.
2.
Select the desired values from the pull-down lists of
Intercom Allow
,
Intercom Mute
,
Intercom Tone
and
Intercom Barge
.
3.
Click
Confirm
to accept the change.
Summary of Contents for SIP-T19 E2 T4 Series
