Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
862
Parameters
Permitted
Values
Default
Note
: It works only if the value of the parameter
“static.features.custom_factory_config.enable” is set to 1 (Enabled) and the file format of
custom factory configuration file must be *.bin. If you change this parameter, the IP phone
will reboot to make the change take effect.
Web User Interface:
Settings->Configuration->Import Factory Config
Phone User Interface:
None
To import the custom factory configuration files via web user interface:
1.
Click on
Settings
->
Configuration
.
2.
Click
Browse
to locate the custom factory configuration file from your local system.
3.
Click
Import
.
When the custom factory configuration file is imported successfully, you can reset the IP phone
to custom factory configurations. For more information on how to reset to factory configuration
via web user interface, refer to
How to reset the IP phone to default factory configurations?
on
You can delete the user-defined factory configurations via web user interface.
To delete the custom factory configuration files via web user interface:
1.
Click on
Settings
->
Configuration
.
2.
Click
Del
in the
Import Factory Config
field.
Summary of Contents for SIP-T19 E2 T4 Series
