Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
344
Parameters
Permitted Values
Default
Menu->Features->Others->Auto Redial->Redial Interval
auto_redial.times
Integer from 1 to 300
10
Description:
Configures the auto redial times when the callee is temporarily unavailable.
The IP phone tries to redial the dialed number as many times as configured till the callee
answers the call.
Note
: It works only if the value of the parameter “auto_redial.enable” is set to 1 (Enabled).
Web User Interface:
Features->General Information->Auto Redial Times (1~300)
Phone User Interface:
Menu->Features->Others->Auto Redial->Redial Times
To configure auto redial via web user interface:
1.
Click on
Features
->
General Information
.
2.
Select the desired value from the pull-down list of
Auto Redial
.
3.
Enter the waiting time in the
Auto Redial Interval (1~300s)
field.
4.
Enter the desired times in the
Auto Redial Times (1~300)
field.
5.
Click
Confirm
to accept the change.
To configure auto redial via phone user interface:
1.
Press
Menu
->
Features
->
Others
->
Auto Redial
.
2.
Press or , or the
Switch
soft key to select the desired value from the
Auto Redial
field.
3.
Enter the waiting time (in seconds) in the
Redial Interval
field.
4.
Enter the desired times in the
Redial Times
field.
5.
Press the
Save
soft key to accept the change.
Summary of Contents for SIP-T19 E2 T4 Series
