Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
422
On Code
and
Off Code
field.
4)
Press or , or the
Switch
soft key to select the ring time to wait before
forwarding from the
After Ring Time
field.
The default ring time is 12 seconds.
4.
Press the
Save
soft key to accept the change.
To configure call forward in custom mode via phone user interface:
1.
Press
Menu
->
Features-
>
Call Forward
.
2.
Press or to select the desired account, and then press the
Enter
soft key.
3.
Press or to select the desired forwarding type, and then press the
Enter
soft key.
4.
Depending on your selection:
a)
If you select
Always Forward
, you can configure it for a specific account.
1)
Press or , or the
Switch
soft key to select the desired value from the
Always Forward
field.
2)
Enter the destination number you want to forward all incoming calls to in the
Forward to
field.
3)
(Optional.) Enter the always forward on code and off code respectively in the
On
Code
and
Off Code
field.
You can also configure the always forward for all accounts. After the always forward
was configured for a specific account, do the following:
1)
Press or to highlight the
Always Forward
field.
2)
Press the
All Lines
soft key.
The LCD screen prompts “Copy to all lines?”.
3)
Press the
OK
soft key to accept the change.
b)
If you select
Busy Forward
,
you can configure it for a specific account.
1)
Press or , or the
Switch
soft key to select the desired value from the
Busy Forward
field.
2)
Enter the destination number you want to forward all incoming calls to when
the IP phone is busy in the
Forward to
field.
3)
(Optional.) Enter the busy forward on code and off code respectively in the
On
Code
and
Off Code
field.
You can also configure the busy forward for all accounts. After the busy forward was
configured for a specific account, do the following:
1)
Press or to highlight the
Busy Forward
field.
2)
Press the
All Lines
soft key.
The LCD screen prompts “Copy to all lines?”.
3)
Press the
OK
soft key to accept the change.
c)
If you select
No Answer Forward
, you can configure it for a specific account.
1)
Press or , or the
Switch
soft key to select the desired value from the
Summary of Contents for SIP-T19 E2 T4 Series
