Configuring Advanced Features
527
Parameters
Permitted Values
Default
None
ldap.display_name
String within 99
characters
Blank
Description:
Configures the
display name of the contact record displayed on the LCD screen. The value
must start with “%” symbol.
Example:
ldap.display_name = %cn
The cn of the contact record is displayed on the LCD screen.
Note
: It works only if the value of the parameter “ldap.enable” is set to 1 (Enabled).
Web User Interface:
Directory->LDAP->LDAP Display Name
Phone User Interface:
None
ldap.version
2 or 3
3
Description:
Configures the LDAP protocol version supported by the IP phone. The version must be the
same as the version assigned on the LDAP server.
Note
: It works only if the value of the parameter “ldap.enable” is set to 1 (Enabled).
Web User Interface:
Directory->LDAP->Protocol
Phone User Interface:
None
ldap.call_in_lookup
0 or 1
0
Description:
Enables or disables the IP phone to perform an LDAP search when receiving an incoming
call.
0
-Disabled
1
-Enabled
Note
: It works only if the value of the parameter “ldap.enable” is set to 1 (Enabled).
Web User Interface:
Directory->LDAP->LDAP Lookup For Incoming Call
Summary of Contents for SIP-T19 E2 T4 Series
