Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 713 / 981

Configuring Advanced Features
691
Macro Action Description
omitted if there is only one expansion module
connected to the phone.)

Menu (You can enter menu by executing this
command at any interface except the
non-executable situations. For example, entering
menu is blocked during an active call.)

Home (You can return back to idle screen by
executing this command at dialing screen for
SIP-T48G/S IP phones)
Example:
$KDialPadPound$
means pressing the pound
key.
Note
: If a key (for example, Redial key) is not found but
the function is available, perform the corresponding
action. If a key is not found and the function is
unavailable, the execution of the action string will be
ignored.
$I<menu item ID>$
The action to be performed for positioning and entering
the desired menu item.
Each menu item has a unique identifier on the IP phone,
you can configure this parameter according to the
system-defined menu item ID. If the menu item ID is not
defined on the phone or there is no matched menu item
on the current screen, the execution of the action string
will be ignored. The menu item ID is case-insensitive.
Example:
$Istatus_list&
means entering the
Status
menu.
Note
: To view the menu item ID, you can configure the
value of the parameter “edk.id_mode.enable” to 1
(Enabled) and then long press the Volume Up key when
the phone is idle.
$P<label>&C<characters
number allowed>&N&M$
The user input prompt string. Enable to prompt the
pop-up box, specify the label for the input box, specify the
maximum input characters, specify the character type for
the input box, and specify whether to mask the input by
the “*”.
“label” means the specified label for pop-up box.
“characters number allowed” defines the maximum
number of input characters.
If &N is included, the character type is Number (default
input method: 123). If &N is not included, the character
type is Text (default input method: abc), you can manually