Yealink SIP-T19 E2 T4 Series, Administrator'S Manual

Page: 465 / 981

Configuring Basic Features
443
6.
(Optional.) Enter the string that will appear on the LCD screen in the
Label
field.
7.
Enter the directed call pickup code followed by the specific extension in the
Value
field.
8.
Press the
Save
soft key to accept the change.
Group Call Pickup
Group call pickup is used for picking up incoming calls within a pre-defined group. If the group
receives many incoming calls at once, the user will pick up the first incoming call, using a group
pickup DSS key or the
GPickup
soft key. This feature depends on support from a SIP server. For
many SIP servers, group call pickup requires a group pickup code, which can be configured on a
phone or a per-line basis.
When you enable group call pickup, the LCD screen will display a
GPickup
soft key when you
pick up the handset, press the Speakerphone key or press the line key. As shown below:
Procedure
Group call pickup can be configured using the following methods.
Central
Provisioning
(Configuration
Files)
<MAC>.cfg
Configure the group call pickup code on a
per-line basis.
Parameter:
account.X.group_pickup_code
Configure group call pickup features on a
phone basis.
Parameters:
features.pickup.group_pickup_enable
features.pickup.group_pickup_code
<y0000000000xx>.cfg
Assign a group call pickup DSS key.
Parameters:
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.line/ programablekey.X.line/