Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/T5 Series IP Phones
750
Parameters
Permitted
Values
Default
account.X.codec.opus.para
[1]
opus-wb or
opus-nb
opus-wb
Description:
Configures the sample rate of the opus audio codec for a specific account.
opus-wb
-Opus-WB (16KHz)
opus-nb
-Opus-NB (8KHz)
Note:
It is only applicable to SIP-T54S/T52S/T48S/T46S/T42S/T41S/T27G IP phones.
Web User Interface:
Account->Codec->Opus Sample Rate
Phone User Interface:
None
[1]
X is the account ID. For SIP-T54S/T48G/T48S/T46G/T46S/T29G, X=1-16; for SIP-T52S/T42G/T42S, X=1-12;
for SIP-T41P/T41S/T27P/T27G, X=1-6; for SIP-T40P/T40G/T23P/T23G, X=1-3; for SIP-T21(P) E2, X=1-2; for
SIP-T19(P) E2, X=1.
To configure the codecs to use and adjust the priority of the enabled codecs via web user
interface:
1.
Click on
Account
->
Codec
.
2.
Select the desired account from the pull-down list of
Account
.
3.
Select the desired codec from the
Disable Codecs
column and then click .
The selected codec appears in the
Enable Codecs
column.
4.
Repeat the step 4 to add more codecs to the
Enable Codecs
column.
5.
To remove the codec from the
Enable Codecs
column, select the desired codec and then
click .
6.
To adjust the priority of codecs, select the desired codec and then click or .
7.
Click
Confirm
to accept the change.
Summary of Contents for SIP-T19 E2 T4 Series
